|
The WBA series has been designed using Teflon printed circuit board and surface mount technology for better performance. The RF preamp was designed to be used with wide band communication receivers, scanners, HT's, frequency counters, distribution amplifiers for satellite signals, VHF/UHF TV, or laboratory instruments. |
 |
Use the WBA-4
amplifier to drive Double Balanced mixers or frequency counters. It amplifies high-level signals to an amplitude of approx. 1v. 1MHz to 1.5GHz 7dB NF 1 dB compression =+11dBm Gain: 1MHz - 8dB to 1.5GHz - 5dB Power requirement: 12v @ 50Ma |
|
|
Use the WBA-6
amplifier for scanners, HT's, Frequency counters,
Satellite Receivers. It amplifies low-level (weak) signals. If the signal is extremely low,
two amplifiers can be used in series. 1 MHz to 2.5GHz 2.8dB NF 1 dB compression=0dBm Gain: 1MHz - 20dB to 2.5GHz - 6dB Power requirement: 12v @ 6Ma |
|
Use the WBA-64
as a distribution amplifier for UHF and VHF signals. 4 MHz to 1.9 GHz 3 dB NF 1 dB compression = +8dBm Gain: 4MHz - 29dB to 1.9GHz - 17dB Power requirement: 12v @ 56Ma |
|
 |
 |
 |
 |
